VersaBar Solid Carbide Boring Bar 1/2 4-Pack Coolant FREE SHANK & HEAD! USA

PROMOTION Save 45% off list price!! VH08M12-SCLCR2 Head CCMT-21.51 (CCMT 21.51). VH08M12-SDUCR2 Head DCMT-21.51 (DCMT 21.51).

VH08M12-SVUCR2 Head VCMT-221 (VCMT 21.51). E08-VBX-6.00 Carbide Shank (coolant fed). It's time to go rigid. See the full offering of. Are you frustrated when you don't have the carbide bar (size, length, insert, hand) you need? So you settle using something that struggles through the job, but it's less than ideal. It doesn't use the insert you prefer, it's not the hand you prefer, you may have to cut off the shank, and it's not coolant fed. In the "new norm" manufacturers are reducing their rigid shank options. Distributors are reducing stock levels.

The result is fewer options to choose from, and fewer carbide shanks in stock on the shelf. If you haven't noticed..... We want to earn your trust. Second, we are making our tools affordable so that every shop can try a rigid shank, without taking out a bank loan. We are are certain that when you (your operator) use a rigid shank, you'll want to throw your steel shanks away.

Once you experience rigidity, the next improvement is going modular. The next big thing in small diameter boring bars. You select the pocket style needed. Heads mirror pocket dimensions on fixed-pocket bars, so no program alterations are necessary.

CCMT/CPMT, DCMT/DPMT, TCMT/TPMT, WCMT/WPMT, VCMT, CNMG, DNMG, WNMG, VNMG, LAYDOWN, ON EDGE and TOP NOTCH. Shank uses RH or LH heads. For shops that use metric shanks, the same head mounts to.

As the universal screw driver of rigid boring bars. Why invest in a new screw driver. When all you need is a new tip?

Consider setup time involved in changing out shanks and setting tool offsets? Compare that to less than 60 seconds changing out the.

Head offsets remain, so setup time for boring bars can be reduced by as much as 90%. Multiply that over days, weeks, months..... Minutes saved equals profit made.

Let's face it, pocket crashes are fact of life. Most can be blamed on a worn pocket. Sometimes it may be a program glitch. It may happen when optimizing cycle time.

Consider the downtime associated with the crash. Tool offsets remain in tact, which means your machine is immediately back in production. Pays you to use it.

VersaBar® head pockets actually increase edge life and prevent pocket crashes. Rigid fixed-pocket bar pockets wear quickly. The reason is unfortunately the nature of the beast. The brazing process requires the tool to be heated to about 1300º F and then slow cool.

The effect of slow cooling sacrifices hardness to a lesser or greater degree. VersaBar® heads bolt on, so their hardness is not compromised. S a pocket wears, tiny gaps.

010" manifest between the pocket and insert (often unnoticed by the operator). The gaps allow the insert to shift while in the cut.

This encourages edge chipping, and size and surface finish are impacted as heat rapidly degrades the cutting edge. This results in more offset adjustments and insert indexing. Operators often resort to s. Himming the pocket (to fill gaps), but deal with size variation, more offset adjustments, more indexing.

What's the cost of the downtime and aggrivation? The insert snaps, blows out the pocket, possibly scrapping a part..... And you need a new fixed-pocket bar? It's impossible to quantify the indirect loss which results from operators continuing to use tools with worn pockets.

But common sense tells us that a carbide insert snuggled against a soft surface is not a good thing. But operators try to avoid the downtime and cost cost associated with changing out the bar, so they nurse the bar along. As the pocket digresses, there are more. Offset adjustments, more indexes, more chipped edges and finally...... Maximum versatility, reduced setup costs, reduced downtime and extended pocket life are all compelling reasons to choose.

Send us your worn and crashed fixed-pocket bars and we'll retrofit them to accept modular V. ErsaBar® - the tool that. Pays for itself, then pays you to use it! The item "VersaBar Solid Carbide Boring Bar 1/2 4-Pack Coolant FREE SHANK & HEAD!

USA" is in sale since Saturday, August 7, 2021. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding". The seller is "toolsaver123" and is located in Dickinson, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Country/Region of Manufacture: United States
MPN: Does Not Apply
Brand: VERSABAR