Boring Head Shank

Bore (2/3)

  • Parlec 2.61 To 3.48 Twin Bore Roughing Boring Head With Pc6 Shank #pc6-4605
  • Parlec 2.06 To 2.73 Twin Bore Roughing Boring Head With Pc5 Shank #pc5-4505
  • Parlec 2.06 To 2.73 Twin Bore Roughing Boring Head With Pc5 Shank #pc5-4505
  • Sip Boring Head. 15-20 Sip Jig Bore. Metric #1 Taper
  • Kennametal E Bore Easiest Way To Dial In A Bore Head
  • Wohlhaupter Boring & Facing Head Wpa 3/52266 With Jig Bore Shank
  • Kaiser Fine Finish Boring Head-ewn53- 310.511 Large Tre-pan Od Or Bore Id Tool +
  • Apt Manual Offset Boring Head 2-1/2 Body Diam, 4 Bore Diam, 5/8 Bar Hole Diam
  • Moore Jig Borer Shank Withcraley 2-1/4 Boring Head 3/8 Tool Bore Vgc
  • Apt 2-1/2 Body Diam, Manual Offset Boring Head 4 Bore Diam, 1/2 Bar Hole Diam
  • Moore Jig Borer Shank Withbridgeport #2 Boring Head 5/8 Tool Bore + 1 Vgc
  • Parlec 2.06 To 2.73 Twin Bore Roughing Boring Head With Cat40 Shank #pc5-4505
  • Iscar Its Bore Mb25 Finish Boring Head Bhfi Mb25-25x50 (loc1189b)
  • Valenite Vari-set Bb-5 Boring Bar, 3.0 2.0 Shank With Head Min Bore 4.50
  • Kennametal Km32-rbht-30-100f Twin Bore, Shank Km32, 1.161 To 1.579 Alb 9517
  • Kennametal Km32-rbht-30-100f Twin Bore, Shank Km32, 1.161 To 1.579 Alb 9517
  • Earth Mover Retromod Line Boring Bore Repair
  • Kennametal Km50-rbht-66-100f Twin Bore, Shank Km50, 2.579 To 3.445 Loc11437
  • Kennametal Km63-rbht-115-150f Twin Bore, Shank Km63, 4.507 To 6.024 Loc11435
  • Kennametal Km50-rbht-66-100f Twin Bore, Shank Km50, 2.579 To 3.445 Loc11438
  • Flynn Usa No. 45 Boring Head Milling Machine Tool Bore Bar Holder 3-4 Tpi Mount
  • Kennametal Km50-rbht-50-90f Twin Bore, Shank Km50, 1.949 To 2.618 Loc11911
  • Kennametal Km50-rbht-66 Twin Bore, Shank Km50, 2.579 To 3.445 Loc11370
  • Kennametal Km63-rbht-115-150f Twin Bore, Shank Km63, 4.507 To 6.024 Alb 9502
  • Kennametal Km50-rbht-66 Twin Bore, Shank Km50, 2.579 To 3.445 Alb 9578
  • D'andrea Boring Head Twin Bore Boring Head 50 68mm With Cat 40 Shank
  • Geometric Die Type Boring Head 1-1/2 Shank Adjustable Bore Head
  • D'andrea Boring Head Twin Bore Boring Head 68 90mm With Cat 40 Shank
  • Alfred Herbert 1 Coventry Die Head Chs Type 1 1/2 Shank. 96 Through Bore Dh72
  • Alfred Herbert 1 Coventry Die Head Ch Type 1 1/2 Shank 1 Through Bore (dh71)
  • Bosch Hc5099 Wild Bore Head Sds-max Shank Bit 2in Diameter
  • Bosch Hc5099 Wild Bore Head Sds-max Shank Bit 2 X 18 X 23-inch